In this manuscript, we describe a unique dataset of human locomotion captured in a variety of out-of-the-laboratory environments captured using Inertial Measurement Unit (IMU) based wearable motion capture. The data contain full-body kinematics for walking, with and without stops, stair ambulation, obstacle course navigation, dynamic movements intended to test agility, and negotiating common obstacles in public spaces such as chairs. The dataset contains 24.2 total hours of movement data from a college student population with an approximately equal split of males to females. In addition, for one of the activities, we captured the egocentric field of view and gaze of the subjects using an eye tracker. Finally, we provide some examples of applications using the dataset and discuss how it might open possibilities for new studies in human gait analysis. © 2023. The Author(s).

Rich variations in gait are generated according to several attributes of the individual and environment, such as age, athleticism, terrain, speed, personal "style", mood, etc. The effects of these attributes can be hard to quantify explicitly, but relatively straightforward to sample. We seek to generate gait that expresses these attributes, creating synthetic gait samples that exemplify a custom mix of attributes. This is difficult to perform manually, and generally restricted to simple, human-interpretable and handcrafted rules. In this manuscript, we present neural network architectures to learn representations of hard to quantify attributes from data, and generate gait trajectories by composing multiple desirable attributes. We demonstrate this method for the two most commonly desired attribute classes: individual style and walking speed. We show that two methods, cost function design and latent space regularization, can be used individually or combined. We also show two uses of machine learning classifiers that recognize individuals and speeds. Firstly, they can be used as quantitative measures of success; if a synthetic gait fools a classifier, then it is considered to be a good example of that class. Secondly, we show that classifiers can be used in the latent space regularizations and cost functions to improve training beyond a typical squared-error cost.

We anticipate wide adoption of wrist and forearm electomyographic (EMG) interface devices worn daily by the same user. This presents unique challenges that are not yet well addressed in the EMG literature, such as adapting for session-specific differences while learning a longer-term model of the specific user. In this manuscript we present two contributions toward this goal. First, we present the MiSDIREKt (Multi-Session Dynamic Interaction Recordings of EMG and Kinematics) dataset acquired using a novel hardware design. A single participant performed four kinds of hand interaction tasks in virtual reality for 43 distinct sessions over 12 days, totaling 814 min. Second, we analyze this data using a non-linear encoder-decoder for dimensionality reduction in gesture classification. We find that an architecture which recalibrates with a small amount of single session data performs at an accuracy of 79.5% on that session, as opposed to architectures which learn solely from the single session (49.6%) or learn only from the training data (55.2%). Copyright © 2022 Karrenbach, Preechayasomboon, Sauer, Boe and Rombokas.

Intuitive control of powered prosthetic lower limbs is still an open-ended research goal. Current controllers employ discrete locomotion modes for well-defined and frequently encountered scenarios such as stair ascent, stair descent, or ramps. Non-standard movements such as side-shuffling into cars and avoiding obstacles are challenging to powered limb users. Human locomotion is a continuous motion comprising rhythmic and non-rhythmic movements, fluidly adapting to the environment. It exhibits strong inter-joint coordination and the movement of a single joint can be largely predicted based on the movement of the rest of the body. We explore a continuous and unified kinematics estimation strategy for a wide variety of movements without the need for labeled examples. Our data-driven approach uses natural body motion from the intact limbs and trunk to generate a kinematic reference trajectory for prosthetic joints. Wearable sensors were worn by 63 subjects without disabilities to record full-body kinematics during typical scenarios (flat ground and stairs), and non-rhythmic and atypical movements (side shuffles, weaving through cones, backward walking). A Recurrent Neural Network (RNN) was trained to predict right ankle and knee kinematics from the kinematics of other joints as inputs. Results were assessed on 3 different test subjects previously unseen by the network. All predictions had a RMSE of less than 7.5 degrees and a high correlation across activities. These offline predictions were robust to subject-specific variations such as walking speed and step length. Additionally, to test the feasibility of using a data-driven reference towards prosthetic control in real-time, a systems test was designed with a single participant. The controller acquired live kinematics, generated predictions using a pre-trained neural network, and demonstrated the capability to actuate the knee joint of a powered prosthesis for the treadmill walking task.

Gait complexity is widely used to understand risk factors for injury, rehabilitation, the performance of assistive devices, and other matters of clinical interest. We analyze the complexity of out-of-the-lab locomotion activities via measures that have previously been used in gait analysis literature, as well as measures from other domains of data analysis. We categorize these broadly as quantifying either the intrinsic dimensionality, the variability, or the regularity, periodicity, or self-similarity of the data from a nonlinear dynamical systems perspective. We perform this analysis on a novel full-body motion capture dataset collected in out-of-the-lab conditions for a variety of indoor environments. This is a unique dataset with a large amount (over 24 h total) of data from participants behaving without low-level instructions in out-of-the-lab indoor environments. We show that reasonable complexity measures can yield surprising, and even profoundly contradictory, results. We suggest that future complexity analysis can use these guidelines to be more specific and intentional about what aspect of complexity a quantitative measure expresses. This will become more important as wearable motion capture technology increasingly allows for comparison of ecologically relevant behavior with lab-based measurements. Copyright © 2022 Sharma and Rombokas.

We seek to predict knee and ankle motion using wearable sensors. These predictions could serve as target trajectories for a lower limb prosthesis. In this manuscript, we investigate the use of egocentric vision for improving performance over kinematic wearable motion capture. We present an out-of-the-lab dataset of 23 healthy subjects navigating public classrooms, a large atrium, and stairs for a total of almost 12 hours of recording. The prediction task is difficult because the movements include avoiding obstacles, other people, idiosyncratic movements such as traversing doors, and individual choices in selecting the future path. We demonstrate that using vision improves the quality of the predicted knee and ankle trajectories, especially in congested spaces and when the visual environment provides information that does not appear simply in the movements of the body. Overall, including vision results in 7.9% and 7.0% improvement in root mean squared error of knee and ankle angle predictions respectively. The improvement in Pearson Correlation Coefficient for knee and ankle predictions is 1.5% and 12.3% respectively. We discuss particular moments where vision greatly improved, or failed to improve, the prediction performance. We also find that the benefits of vision can be enhanced with more data. Lastly, we discuss challenges of continuous estimation of gait in natural, out-of-the-lab datasets.